Cleaning machine does not drain or leak water for maintenance

Engineer analysis and maintenance suggestions:

(1) Power supply issue. Firstly, check if the power supply of the instrument is normal and ensure that the power socket of the cleaning machine is working properly. This can be verified by inserting other appliances. If there is no problem with the power socket, then check if the power cord is plugged in tightly and if the power supply is damaged or aged. If the power cord is damaged, it should be dealt with promptly.

(2) The door is not closed properly. The instrument door is not closed properly, and the device cannot start. Machines are usually equipped with intelligent door lock devices to ensure that the door lock is tightly closed and prevent water and steam leaks. Ensure that the door lock is in the correct position and check if the door seal is intact to ensure a good seal.

(3) Control panel settings. Check the instrument control panel settings. Users may accidentally change programs or set incorrect parameters, causing the device to fail to start. Please make sure to choose the correct cleaning procedure. The control panel may also be damaged and may require repair or replacement.

2. Unable to drain

Fault description: The user reported that the instrument did not drain or accumulated water inside the instrument after the cleaning cycle.

Engineer analysis and maintenance suggestions:

(1) The drainage pipe is blocked. This is one of the common drainage problems. Check if the drainage pipe is blocked. The drainage pipe may be blocked by debris or other debris. Once such issues arise, they need to be clarified. This usually requires dismantling the drainage pipe and using appropriate tools for cleaning.

(2) Cleaning of filters. The bottle washing machine is equipped with a filter to prevent debris and particles from entering the drainage system. Check the filters, clean them or replace damaged filters. Also, check if the drainage pump is clean and not blocked by glass fragments.

(3) Drainage pump issue. If the drainage pump malfunctions, it will also be unable to discharge or clean water. Check if the drainage pump is working properly and listen for any abnormal sounds. If there is a problem with the drainage pump, it is recommended to seek guidance from a professional after-sales engineer to solve it.

Bottle washing machine leaking water

Fault description: Users may find that the instrument is leaking during operation or after shutdown.

Engineer analysis and maintenance suggestions:

(1) Sealing strip issue. Check the instrument seal to ensure it is not damaged or deteriorated. The purpose of sealing is to ensure that water does not leak from inside the instrument into the surrounding environment. If there are cracks or wear on the sealing strip, it should be replaced in a timely manner. http://www.tj-yuping.com

(2) Internal leakage: Check if there is any damage or crack inside the machine, which may cause internal leakage. If internal components are found to be damaged, it is necessary to contact professional technical personnel for repair or replacement.

(3) Pipeline connection: Check the connection of the inlet and outlet pipes to ensure they are tightly connected and free of leakage. Sometimes, loose pipe connections can cause water leakage.